Answer – “Part #70-987, sold through Canadian Tire, is exactly the same as Hamsar part # 45040. Please consult our Application Guide to confirm this is the correct part for your vehicle.”

Answer - If your vehicle is not included in the Application Guide, we suggest using Hamsar part #45040 connected to the fog lamps ONLY. If your vehicle is not equipped with fog lamps, the kit part #45040 can be connected to an aftermarket set of fog lamps.

Answer – No. Our daytime running lights will only work with halogen light bulbs. See our halogen bulbs.

Answer – Complete the Inquiry Form and we will respond within 48 hours.

Answer - A 'headlights on' policy decreases accident rates but increases operating costs, which are significant for two main reasons - headlamp replacements and fuel. Headlamp replacement costs can easily be as high as $120.00 per year, per vehicle. Extra fuel is consumed because of the constant demand of electrical energy to run all of the vehicle's lights. This additional fuel would amount to .195 gallons for cars and .225 gallons for trucks every 100 miles (160 km) traveled. The fuel costs for a truck averaging 50,000 miles per year (approx 80,000 km) would be $130.00. This does not take into account any costs associated with the lights being left on unintentionally and the cost of road-side assistance. Hamsar's dedicated daytime running light systems can eliminate up to 95% of the operating costs of driving with all lights on. "Those vehicle users (including truck and bus companies) who have operated with lights on in daytime in the absence of the regulation will also benefit disproportionately in being able to avoid the costly use of all vehicle lamps." 2/9/87 Canada Gazette, Part II.

Answer – Hamsar Visi-Light® daytime running lights all feature the proprietary Hamsar 0100 custom integrated circuit. This means that every daytime running light produced by Hamsar is solid state using the very latest technology. There is nothing to wear out, and the Hamsar 0100 integrated circuit protects your vehicle with over and under voltage protection - the most advanced circuitry available today. Hamsar manufactures daytime running lights for many companies at the original equipment level such as Peterbilt, Kenworth, Mack, Volvo, Navistar, Freightliner, Land Rover, and many other well known vehicle makes around the world. Every daytime running light made by Hamsar is built using the same care that goes into the original equipment models so that every one of the Visi-Light® daytime running lights meet or exceed all applicable CSA and FM VSS lighting standards.

Answer - Hamsar manufactures many different types of daytime running lights in order to meet the needs of every customer. Our DRLs range from simple types that turn on all lights of the vehicle to the most sophisticated dedicated DRLs that turn on the low or high beams at reduced intensity. Photo cell equipped DRL models that automatically turn on all lights at dusk or in poor driving conditions are also available.

Answer – The standard range of Hamsar daytime running lights operate in most 12 volt systems.

Answer – No. A standard toolbox should contain all the necessary tools required for installation.

Answer – Every Hamsar daytime running light set includes all the necessary components necessary for installation, including tap splices.

Answer – Yes. Hamsar's dedicated daytime running light systems can eliminate up to 95% of the operating costs of driving with all lights on.

Answer – In Canada, yes.